Here are the SIP settings , if you want to use your VoIP number from Mobilink Infinity on a softphone.

You’ll have to first logon to your CPE admin interface , Browse to NAT -> ALG and Uncheck “SIP ALG” and click Apply. If you use an outdoor unit , do the same with the outdoor CPE as well.

data-ad-client="ca-pub-1203973081491704" data-ad-slot="3706515277" data-ad-format="auto">

Fireup x-lite and configure it with the following settings.

Server: 10.215.11.250
Port: 5060
UserID: 725XXXX
Password: Your wi-max password
Domain: Hauwei.com
Authentication User: 725XXXX

Have fun 🙂

Howto register your Mobilink Infinity VoIP number on Softphone
Tagged on:                         

23 thoughts on “Howto register your Mobilink Infinity VoIP number on Softphone

  • July 27, 2008 at 5:02 pm
    Permalink

    hi please tell me how to access my indoor and outdoor cpe…i dunt know anything abt it..so cud u please help me …

    thanks.

    Reply
  • August 14, 2008 at 11:32 am
    Permalink

    i am not able to call with soft phone,
    i am using eyebeam…

    username is my wateen phone?

    and which password?

    Reply
  • August 14, 2008 at 3:06 pm
    Permalink

    thanx taichiman,

    i hav asked thier customer support to give the passwords of indoor and outdoor devices but they are saying that we are not allowed to give you, so how hav u got it n wht shud i do to get my cpe passwords?

    Reply
  • August 16, 2008 at 10:12 pm
    Permalink

    @faraz,

    You will need to force them into giving you the password. I asked for mine because i need it for setting up NAT / Firewall + Wifi Security. You could ask for the same.

    Reply
  • September 1, 2008 at 6:47 am
    Permalink

    hey taichiman

    i hav got the password of my cpe but still unable to use softfone , cudnt configure sip account settings properly, so if u can guide me to each n every step ill b really thankful to u

    Reply
  • September 1, 2008 at 11:22 pm
    Permalink

    hi … i wanna use my mobilink number as voip as right now i am abraod and may i use my mobilink number as voip ????? just help me out if anyone knows about this matter

    Reply
  • September 4, 2008 at 1:46 pm
    Permalink

    I just got Mobilink and apparently you can no longer force them into giving router passwords. It is quite frustrating.

    I can always reset my router and hence go back to the default pass. However all settings will also revert to default.

    Since you have access to your router, can you please give me the settings?

    Thanks!

    Reply
  • October 29, 2008 at 9:17 am
    Permalink

    HELLO SIR IHAVE A EXPRESS TALK SOFTWARE BUT I HAVE NO IDEA TO USE IT!

    Reply
  • May 19, 2009 at 5:03 pm
    Permalink

    @taichiman: r u using hauwei device?

    Reply
  • May 23, 2009 at 6:03 am
    Permalink

    Hello

    Ali I can solve your problem but I need your abroad country name where were you live. Therefore I asked you every country has different gateways where you want run Mobilink Infinity VOIP Soft Phone. Insha allah I will be solve your problem

    Do you want privately contact me khurram_wali@yahoo.com

    Reply
  • April 27, 2010 at 11:17 am
    Permalink

    Hi i m trying to configure X-Lite with above settings but not successful.
    Please help

    Reply
  • October 30, 2010 at 12:52 am
    Permalink

    buddy, i have stucked i dont know where to enter the server and port… in x-lite 3.0

    I am also unable to find NAT -> ALG in CPE Admin… could you please help me out to configure my mobilink infinity to use my voip. one more thing i have tried use a telephone cable from my cpe to my pc modem but again no dialtone and not able to connect the same… your earlier response will be appreciated.

    Reply
  • February 22, 2011 at 11:28 pm
    Permalink

    can i configure it with 3cx phone system ? and secondly have tried evry pssible way but they arent providing me with my pass,can u help?

    Reply
  • March 27, 2011 at 2:43 pm
    Permalink

    Hello guys,

    I’m trying to access the interface as well but it keeps rejecting the admin pwd. Can anyone of share the password bcz I tried getting mine frmo mobilink but they refusin it. bastards…lol

    Reply
  • May 19, 2011 at 2:03 pm
    Permalink

    Dear i got infinity 2 weeks before plz tell me how can i login into my account in mobilink , my samsung corby is requiring a network id to connect the wifi , what the hell is thi network id plz tell me soon . . .

    Reply
  • May 19, 2011 at 2:04 pm
    Permalink

    Dear i got infinity 2 weeks before plz tell me how can i login into my account in mobilink , my samsung corby is requiring a network id to connect the wifi , what the hell is thi network id plz tell me soon .

    Reply
  • September 16, 2011 at 10:19 pm
    Permalink

    can we change wifi password of mobilink infinity please any one tell me
    thanx

    Reply
  • September 12, 2014 at 11:45 am
    Permalink

    hi i am using evo 3g broadband, i want to make my broadband internet into wifi & i have wimax router will u pls help me how to set the configuration of router.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.